Mitutoyo - S574 Crysta-Plus CNC CMM
Crysta-Apex S574, Series-191 Standard CNC CMM
The CRYSTA-Apex S is a high-accuracy CNC coordinate measuring machine that guarantees a maximum permissible error of *E0,MPE = (1.7+3L/1000)μm [500/700/900 Series]. Comparing the CRYSTA-Apex S with CMMs offering *E0,MPE of approximately (2.5+4L/1000)µm where a required tolerance on a dimension is ±0.02 mm, then the measuring machine uncertainty should be no more than one-fifth (ideally one-tenth) of that, i.e. 4μm. This means that with a general-purpose CMM, when the measured length exceeds 14.8”(375mm), machine uncertainty exceeds one-fifth of the dimension tolerance in this case. In contrast, as shown in the figure on the right, with the CRYSTA-Apex S the measurement uncertainty remains within one-fifth of the dimension tolerance up to 30.2” (766mm). The higher accuracy specification of the CRYSTA-Apex S therefore gives it more than double the effective measuring range in terms of accuracy-guarantee capability in this case.
Order No. 191-248
Model No: S574 Crysta-Plus CNC
Type: Bridge Type
X-axis Range: 19.69in / 500mm
Y-axis Range: 27.56in / 700mm
Z-axis Range: 15.74in / 400mm
Resolution: 0.000004" / (0.0001mm)
Guide Type: Air Bearing on each axis
Maximum Drive Speed 3D: 20.43”/s (519mm/s)
Maximum Acceleration 3D 0.23G (2,309mm/s2)
Work Table Material: Black Granite
Work table Size: 30.07x46.25in / 764x1175mm
Tapped insert: M8x1.25mm
Workpiece Height: 21.46" / (545mm)
Workpiece load: 396lbs / 180kg
Mass (stand included): 1377lbs / (625kg)
Machine Dimension: 42.60"x 40.86"x 86.02" / (1082 x 1458 x 2185mm)
Air Supply: Pressure: 50.7 PSI (0.35MPa)
Consumption: 1.76CFM (50L/min)
NOTE: MITUTOYO GOLD CARE PROMO included at NO ADDITIONAL CHARGE, please contact our Sales Representative.
WARRANTY: One Year from the date of installation.