Elcometer 355, Coating Thickness Gauge (Standard)

Preloader

Elcometer 355, Coating Thickness Gauge (Standard)

Product Description

The Elcometer 355's watchwords are accuracy, simplicity, versatility and durability making this a true state of the art hand held measuring system packed with time-saving and cost-cutting features.

Available as a standard and top model, the unit's large memory stores up to 10,000 readings in batches and data can be output to PC, datalogger or printer as required.

With a comprehensive range of Probe Modules available, simply select the most appropriate for the application. All modules are supplied with calibration foils.

  • ±1% or 1µm, whichever is the greater, accuracy
  • Rugged aluminium case designed for the toughest environments
  • ElcoMaster™ 2.0 software supplied
  • Full statistical analysis - mean standard deviation, number of readings, highest and lowest value
  • RS232 output
  • Date and time stamp
  • Two year warranty if registered via www.elcometer.com

Each gauge is supplied without a probe allowing the choice of the correct probe for the relevant applications.

 

Technical Specifications - Elcometer 355 Coating Thickness Gauge

Operating Temperature 0°C to 50°C (32°F to 120°F)
Storage Temperature -10°C to 60°C (14°F to 140°F)
Dimensions 175 x 83 x 42mm (6.9 x 3.3 x 1.6")
Weight 650g (1.43lb)
Reading Speed 40 readings per minute
Data Output RS232C Serial or Parallel Output via D25 Type Connector (Female)
Memory Standard: 5,000 reading memory in pre-set batches Top: 10,000 reading memory in up to 200 batches (individually calibrated)
Battery Type 3 x 1.5V AA Cells (Alkaline) or 3 x 1.5V Nickel Metal Hydride rechargeable cells
Battery Life Minimum: 40 hours with alkaline batteries, 20 hours with rechargeable batteries
Certificate available Certificate of Test - for variable calibration equipment and supplied with readings. A Certificate of Inspection states the instrument is tested in accordance with our procedures
Packing List
  • Elcometer 355 Top or Standard Gauge
  • leather carry case
  • 3 x AA batteries
  • ElcoMaster™ software
  • PC cable
  • operating instructions

 

Product Accessories

Certified Precision Foil Set (Shims)

355_jumbo Jumbo Hand Grip
Ideal for precision placement for the most accurate results on flat and curved surfaces. Place the probe inside the Jumbo Hand Grip and take measurements - ideal when wearing gloves.
T9997766- Jumbo Hand Grip - F and N Probes
Use with the following Elcometer 355 probes: F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard
355_vadaptor V-Probe Adaptor
Ideal for precision placement for the most accurate results on medium and large diameter curved surfaces such as pipes and cylinders.
T9997381 V-Probe Adaptor - F and N Probes
Use with the following Elcometer 355 probes: F1 Standard, F2 Standard, F4 Standard, F5 Rebar, N1 Standard
355_blanket_probe Soft Material/Blanket Probe

Ideal for taking precision readings on soft coatings or printing blankets. The wide, flat base design acts as a load spreader, reducing the total force at a single point.

T35511963 Soft Material/Blanket Probe for the Elcometer 355
355_probe_jig Probe Placement Jig
For the most reliable and repeatable coating thickness measurements, making the gauge score highly in repeatability and reproducibility studies. Ideal for small and large components alike. The probe placement jig is supplied with a probe housing to suit standard F1, F2, F4, F5 and N1 probes. Housings to suit other probes are available as optional accessories.
T95012880 Probe Placement Jig
T95013028 Component Hand Vice - a simple vice to hold small components
T95012888 Cable Release Assembly - ideal for remote measurements
Use with the following probes: