Description
Shimpo Instruments | NIDEC-SHIMPO AMERICA
Model DT-311J, NEMA 4X Stroboscope for Harsh, Wet Work Areas
Series DT-311J NEMA 4X Stroboscope for Harsh, Wet Work Areas
Where powerful illumination and rugged speed measuring accuracy is required for the textile industry, the DT-311J will perform where other stroboscopes will not. The DT-311J is used to set injection timing, injection pressure, timing of shedding and weft running time of weaving machinery. Units combine rugged NEMA 4X (IP65) housing with high performance accuracy, special phase shifting, with shock absorbing components and top mounted handle, allows the equipment operator maximum flexibility when setting the timing of weaving machinery.
Features
- Internal signal “MODE” (flash), allow manual control and display of flash rate (rpm), deg (flash delay angle in degrees)
- External triggering control, automatically synchronizes to an input signal
- Phase “SHIFT” switch, single touch – changes flash timing, 0 – 359 degrees
- “ZERO” setting control, zeroing at any angle is easy-single touch
- Long life flashtubes, flash rates of 200-1500 fpm, the DT-311J flash tubes are designed for extra long life
- Angle division “DIV”, permits special flash interval ratio settings: 1/1, 1/2, 1/3, 1/4, and 2/4 flashes per rotation
- LIMTED RANGE: 200-1,500 RPM/FPM
- Accepts external trigger input and provides synchronizing pulse output
- Water & Dustproof housing (IP65)
- Phase shift for best view and flash photography
- Hand-held or tripod operation
- Easy-to-operate controls
- Easy-to-read LED display
Specifications
| Flash Range | 200-1,500 FPM |
| Internal Signal Range | 200 to 1,500 FPM |
| Phase Shift | 0° – 359° / 1° increments |
| Accuracy | ±1 digit |
| Flash Rate/Phase Angle Setter | Rotary dial |
| Display | 4 digit, 10mm high Red LED |
| Divide Ratio | 1/1, 1/2, 1/3, 1/4, 2/4 with shift |
| Input Signal | High level: 5-24 V pulse Low Level: 0-1 V pulse. 2 msec minimum. Impedance less than 10k Ω |
| Input Impedance | 47k |
| Display Mode | Phase shift (degree), Tachometer |
| Flashtube | Xenon lamp, max 10 W at 1,5000 rpm |
| Flashtube Life | 1,200 hours at 1,500 rpm |
| Power Requirements | 115 V or 230 V AC (specify), 50/60 Hz, 30 VA |
| Power Consumption | 20VA max |
| Operating Temp | 32 to 104 °F (0 to 40 °C) |
| Dimensions | 149w x 174h x 214d mm |
| Weight | 4.2 lb (1.9 Kg) |
| Warranty | 2 years |
| Included Accessories | 19.68’ (6m) input/power cable with connector, rubber strobe guard with handle |
