Description
Magnaflux North America
Model P-1500, 1500 amp AC/HWDC Economical Power Pack
Economical Power Pack Magnetic Current Generators
P-Series portable power packs are convenient and economical inspection units that are used in a wide range of magnetic particle inspection applications that require only moderate power.
These portable electromagntic current generators are ideal for inspecting large or heavy parts, in-service mobile equipment or job-site weld testing with magnetic particle inspection NDT method.
Benefits
- Find surface defects with AC current; switch cable connection to half wave DC (HWDC) for near-surface flaws
- Locate defects in any direction using prods, central conductor, coil (wrap part with 3-5 turns of cable)
- Infinitely variable current control
- Demagnetize parts in AC mode by slowly turning the current dial to zero
- Built-in automatic-reset circuit breaker
- May be used as the main power source for the Mag Kit modular bench inspection system
- Comes standard with 15 ft / 4.5 m remote control cable
-
Specifications
- Length: 22″ (55.9 cm)
- Width: 9.5″ (24.1 cm)
- Height: 9.5″ (24.1 cm)
- Maximum Output: 1500 amps, AC or HWDC
- Available Voltages: 230,460, 50 or 60 Hertz; single phase power
- Line Current: 42 amps @ 230 VAC; 21 amps @ 460 VAC
- Maximum Duty Cycle: 2 minutes ON, 2 minutes OFF
- Unit Weight: 93 lbs (42.2 kg)
Note: Current ratings are based on the use of two 15-foot length 4/0 cable, 4/0 cable not included, must be purchased separately.
Part Numbers
P-1500, 230V 198500
P-1500, 460V 198500-01
