Description
Gagemaker
DG-1008, Shoulder Location Gauge | 0-8″ Digital Depth Gauge
| 0” – 8” (0 mm – 203.2 mm) | .0005”/.01 mm | 8″ Base Digital Depth Gage |
Our digital depth gages inspect the location of internal and external shoulder and grooves from the face of pin and box connections or other datum surfaces.
The DG-1000 Series is available with the standard base, a 12″ base, and a 20″ base.
These gages are available in ranges: 0 – 8”, 0 – 12″, 0 – 18″, and 0 – 24″.
The standard gage (DG-1000 Series) is supplied with a 7” extension arm and a 0° and 45° contact point holder for use with any #4-48 threaded contact point
(one .072″ contact point (T072) supplied unless otherwise requested).
Longer extension arms and other contact point configurations and adapters are available upon request.
The 12″ (DG-1200 Series) and 20″ (DG-2000 Series) gages include one double sided blade contact instead of a contact point and a contact point holder.
Digital depth gages do not requires a setting standard.
The gage is preset to zero on any flat surface and then applied to the product.
Actual length measurements display on the gage’s digital readout.
Features
- Inspect internal an external shoulder and groove locations.
- Uses an interchangeable contact point or blade that can service many different applications.
- Inch/metric conversion with digital readout
- Digital readout with .0005″/.01 mm resolution and SPC Output
