Description

L.S. STARRETT CO.
64″ X 48″ X 40″ Starrett RDG, Coordinate Measuring Machine (CMM) PRE-OWNED  

                                 Renishaw  PH10M Plus Probe with TP20

The PH10M PLUS and PH10MQ PLUS are motorized indexing heads that re-orientate the probe repeatably to any one of 720 positions at 7.5° increments.               Autojoint mount for repeatable probe positioning

The TP20 is a compact 5-way, or 6-way, kinematic touch-trigger probe system.

                   Renishaw UCC Controller (new installed unit)                                              

The UCC CMM controller has the capability of Controlling three axes of a CMM (accepting digital read-head signals)                                                                        Accepting input signals from air pressure, contactor feedback and all axis inner and outer travel limit switches.                                                                          Accepting two uncommitted general purpose input signals and generating one uncommitted general purpose output signal.

Directly supporting the TP1, TP2, TP6, TP20 touch-trigger probes. Indirectly supporting the TP200 via an external PI 200-3 interface.                                      Providing a +24 Volt supply for use by the CMM switches.

Complete rewire of CMM system & integration with Renishaw controller.

Complete air hose line replacement for air bearing operation

Complete removal and replace all airlines with new hose and connectors.

CMM Manager software, latest edition and new Dell computer system.

                              Full-Featured CMM Software Package

CMM-Manager also offers you flexible yet easy-to-use functionalities, including graphical probe configuration management, automatic tip calibration,                         cross section scanning and hole pattern measurement.

CMM-Manager is a task-based, highly intuitive measurement software package for your CMMs.

It is a fully integrated environment supporting walk-in quick-measure, one-click CAD-measure, collision-free CAD-teach,

virtual simulation, real-time verification, advanced path planning, CAD alignment and Datum alignment.

 On-site installation, calibration and CMM Software training.

 One-Year On-site Warranty of all New parts and 30 days on CMM components.

 Customer will be required to provide a trucking company & machine rigger, to deliver unit and set CMM into place at your plant location.

 ANNUAL ONSITE – Long Form Calibration of CMM can be preformed by Houston Precision, Inc., please call (713) 943-1155 for this service.