Mahr – Millimar Dimensionair – INCH

$0.00

Description

Mahr Federal
Millimar Dimensionair Air Gauge (single master system) INCH

  • Operated with regular workshop compressed air (40-125 psi).
  • An internal pressure regulator keeps the measuring pressure within the calibrated range.
  • Zero offset of the instrument with just one setting standard and the zero adjuster.
  • Clear display with fine dial graduation and needle thin pointer gives an accurate, reliable readout. An integrated air filter removes dust and dirt particles from the air supply.
  • Equipment connection on the front of the device; hand tightening is sufficient for tight connections
  • No recalibration required after changing the measuring equipment; measurement can be resumed immediately after setting the instrument to zero
  • 4 models available, choice of mm or inches

Technical data

Order no. Product type Display Scale reading Range of analog display inches Graduation value inch Compatibility Features
2095183
D-1250
Large analog scale with 2 tolerance markers
Dial Diameter 82.6 mm / 3.25”
± .003”
.0001”
Federal
1
2095184
D-2500
Large analog scale with 2 tolerance markers
Dial Diameter 82.6 mm / 3.25”
± .0015″
.00005″
Federal
1
2095185
D-5000
Large analog scale with 2 tolerance markers
Dial Diameter 82.6 mm / 3.25”
± .00075″
.00002”
Federal
1
2095186
D-10000
Large analog scale with 2 tolerance markers
Dial Diameter 82.6 mm / 3.25”
± .0003”
.00001”
Federal
1
2095189
D-20000
Large analog scale with 2 tolerance markers
Dial Diameter 82.6 mm / 3.25”
± .00015″
.000005″
Federal
1
2095195
D-4000
Large analog scale with 2 tolerance markers
Dial Diameter 152.4 mm / 6″
± .0015″
.000025″
Federal
1
2095196
D-8000
Large analog scale with 2 tolerance markers
Dial Diameter 152.4 mm / 6″
± .00075″
.00001”
Federal
1
2095197
D-16000
Large analog scale with 2 tolerance markers
Dial Diameter 152.4 mm / 6″
± .0003″
.00001”
Federal
1
2095198
D-32000
Large analog scale with 2 tolerance markers
Dial Diameter 152.4 mm / 6″
± .00015″
.000005″
Federal
1