Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES
Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES - Image 2
Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES - Image 3
  1. Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES
  2. Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES - Image 2
  3. Mueller - Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES - Image 3

Mueller – Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGES

Categories: , , SKU: MG1750

Description

Mueller Gage

Series 1750, DEEP IN-REACH GROOVE DIAMETER GAGE

 

DEEP INREACH GROOVE DIAMETER GAGES

Model 1765
20″ inreach Approx. weight 2 lb. 10 oz.
Model 1760
16″ inreach Approx. weight 2 lb. 6 oz.
Model 1755
12″ inreach Approx. weight 2 lb. 2 oz.
Model 1750
8″ inreach Approx. weight 1 lb. 14 oz.
Standard models available with 8″, 12″, 16″ and 20″ inreach for hard to reach groove and recess diameters
1.400″ to 6.400″ inside diameter range with interchangeable lower measuring tips. Tips for larger diameters available. Model 1750 -8″ inreach can be modified to enter 1″ entry bore diameter.
Full 5/8″ retraction of upper measuring tip-will check groove recess diameters up to 5/8″ larger than entry bore diameter. Greater retraction available for deeper grooves as optional extra.
Modified measuring tips readily available for applications not covered by standard range.
Two point contact standard. Three point contact available.
Supplied with AGD group 1 .0005″ dial indicator with 1/8″ travel – .01mm dial indicator with 2.5 mm travel optional.
Finished hardwood storage cases available for all models

 

Model
Number		 Inreach Diameter
Range		 Approximate
Weight
1750 8″  *1.400″-6.400″ 1 lb. 14 oz.
1755 12″  *1.400″-6.400″ 2 lb.   2 oz.
1760 16″  *1.400″-6.400″ 2 lb.   6 oz.
1765 20″  *1.400″-6.400″ 2 lb. 10 oz.

          *See lower measuring tip selection chart

 

  INTERCHANGEABLE LOWER MEASURING TIP
SELECTION CHART
Tip No. “A” Diameter Range
MIN.             MAX.
1775-1 1.400″     –     1.900″
1775-2 1.900″     –     2.400″
1775-3 2.400″     –     2.900″
1775-4 2.900″     –     3.400″
1775-5 3.400″     –     3.900″
1775-6 3.900″     –     4.400″
1775-7 4.400″     –     4.900″
1775-8 4.900″     –     5.400″
1775-9 5.400″     –     5.900″
1775-10 5.900″     –     6.400″

         If groove diameter & entry bore diameter are not covered by same tip number,

        please advise both dimensions and we will provide special tip at no extra charge

 

ORDERING INFORMATION

Gage supplied with 1775-0 upper measuring tip and one (1) only lower measuring tip selected from ten (10) stock sizes listed (1775-1 through 1775-10). For special applications supply entry bore diameter and groove diameter and we will supply special lower tip at no extra cost.

Related products