Polar-Cool LTSS Blue, Lite-Duty Synthetic Coolant, 5 gal. pail

$73.50

Category: SKU: SKU 1873

Description

Polar-Cool LTSS Blue, Lite-Duty Semi-Synthetic Coolant, 5 gal. pail

Semi-Synthetic Cutting & Grinding Coolant

Polar-Cool LTSS Blue is a general-purpose semi-synthetic coolant that can be used on cast iron, titanium, nickel and chrome alloys.

It will stain aluminum and copper containing alloys, but in some instances can be used if immediately washed after machining.

          BENEFITS

              * EXCELLENT BACTERIA & FUNGUS RESISTANCE

                * STABLE MICRO-EMULSION

                * HIGH TRAMP OIL REJECTION

                * NON IRRITATING TO SKIN

                * MILD, NON-OFFENSIVE ODOR

                * EXCELLENT CORROSION PROTECTION

                * DOES NOT REMOVE PAINT OR DAMAGE MACHINES

                * HARD WATER STABILITY                        

It has been designed to provide good lubrication, corrosion protection and low foam characteristics.

This product forms a micro-emulsion which enhances the separation of tramp oils, that can then be easliy removed by skimmers and recycling systems.

In grinding applications, it will easily drop out fines and does not contain any stickey additives that will enhance formation of surface swarf and sludge.

The combination of additives used rarely cause wheel laoding in grinding applications.

It contains a blend of lubricant additives that enalbe it to preform many operations in a wide variety of applicatioins including milling, drilling, boring, cutting, grinding and more.

LUBRICATING FUNCTION

Polar-Cool LTSS Blue contains an extreme pressure additive that forms a complex reducing friction at the tool/part interface.

Along with petroleum oil, this product contains additional film-boundary  additives that further enhance lubrication and heat dissipation.

This coolant will outperform many semi-synthetic and soluble oil type products.

 PACKAGING

Polar-Cool MDSS Blue is available in 5 gallon pails, 55 gallon drums, 275 gallon totes and bulk quantities.

MIXING INSTRUCTIONS

For most applications, Polar-Cool MDSS Blue should be used in an operating range of 5 – 10% (20:1 – 10:1) for machining and 3 – 5% (33:1 – 20:1) for grinding.

When mixing, add the coolant concentration to water and mix thourghly. 

It is best, if the coolant cocentrate and water are mixed in a separate container prior to adding to your system.  

The sump life of this coolant, will be greatly enhanced if the charged to a clean bacteria-free system.

FINALLY 

Why Customers Choose POLAR-COOL Coolants

  • Eliminates Rancidity  
  • Extends Tool Life
  • Less Coolant Required
  • Eliminates Rust/Corrosion
  • Eliminates Dermatitis