Description
Polar-Cool HDSS Blue, Heavy-Duty Semi-Synthetic Coolant, 5 gal. pail
Heavy-Duty Cutting & Grinding Coolant
Polar-Cool HDSS Blue is our heaviest duty semi-synthetic coolant that can be used on cast iron, all steels, aluminum and most other non-ferrous metals.
BENEFITS
* EXCEPTIONALLY HIGH LUBRICANT CONTENT
* EXCELLENT BACTERIA & FUNGUS RESISTANCE
* STABLE MICRO-EMULSION
* HIGH TRAMP OIL REJECTION
* NON IRRITATING TO SKIN
* MILD, NON-OFFENSIVE ODOR
* EXCELLENT CORROSION PROTECTION
* DOES NOT REMOVE PAINT OR DAMAGE MACHINES
* HARD WATER STABILITY
A blend of extreme pressure additives, petroleum oil and vegatable oil, enable this product to be used in the most severe applications.
In many cases it will outperform medium duty, to heavy-duty, soluble oils while still provideing the benefits of a semi-synthetic coolant.
If forms a micro-emulsion which enhances tramp oil rejection, allowing for ease of their removal.
Polar-Cool HDSS Blue was designed to provide excellant corrorisiom protection, even under hard water conditions, low foam and long sump life.
As all our semi-synthetic coolants, this product is free of any hazardous components, including diethanolamine, phenols and PCB’s, which mkaes it envirementally friendly and safe to use.
This coolant can be used in a wide variety of applicatioins including milling, drilling, turning, boring, tapping, grinding, broaching and more.
LUBRICATING FUNCTION
Polar-Cool HDSS Blue contains a high amount of extreme pressure agents along with a high petroleum oil and vegetable oil content.
These additives work synergistically to provide excellent film-boundary lubrication and heat dissipation at the tool/part interface providing excellent tool-life and art finish.
This coolant will outperform many semi-synthetic and soluble oil type products.
PACKAGING
Polar-Cool HDSS Blue is available in 5 gallon pails, 55 gallon drums, 275 gallon totes and bulk quantities.
MIXING INSTRUCTIONS
For most applications, Polar-Cool HDSS Blue should be used in an operating range of 5 – 10% (20:1 – 10:1) for machining and 3 – 5% (33:1 – 20:1) for grinding.
When mixing, add the coolant concentration to water and mix thourghly.
It is best, if the coolant cocentrate and water are mixed in a separate container prior to adding to your system.
The sump life of this coolant, will be greatly enhanced if the charged to a clean bacteria-free system.
FINALLY
Why Customers Choose POLAR-COOL Coolants
- Eliminates Rancidity
- Extends Tool Life
- Less Coolant Required
- Eliminates Rust/Corrosion
- Eliminates Dermatitis
